Hydraulics for tipper trailer, hydraulic unit 12V + telescopic cylinder stroke 700. Load capacity up to 5 tons

The set is suitable for attachment to dump trucks, hydraulic packs, lifting platforms, loading platforms and others. Used wherever hydraulic power is required to lift a load, with the load being lowered by gravity and the pressure of the lifted weight.

In the set:

Hydraulic unit 12V
Stroke of the hydraulic cylinder - 700 mm
A hydraulic hose of the required length and cross-section for the correct connection of the kit.
Cylinder mounting slot at the bottom of the charging box.
Clamp for attaching the power supply unit to the base.
The connection that connects the hydraulic cylinder to the power source

Hydraulic device:

Lifting and lowering is fully controlled by the included remote control. The device is completely ready to use, just connect it to the actuator and fill it with oil.

Technical data of the set:

Number of sections: 3
Working stroke: 700 mm
Maximum speed of piston rods: 0.5 m/s
Oil requirement: 2.5 liters
Maximum working pressure: 16 MPa
Actuation pressure: 0.5 MPa
To connect the cylinder thread: M22x1.5
Pump capacity: 2.6 cm³/rev (7 l/min at 90 bar)
Maximum pump pressure: 180 bar
Electric motor current: 12V DC
Engine power: 2.0 kW
Maximum motor speed: 2600 rpm
Oil tank volume: 11L
Hydraulic oil connection: 3/8"
Permissible ambient temperature: -40ºC to +60ºC
Permitted oil temperature: -15ºC to +80ºC
Fluid type: mineral oil-based hydraulic oil